How to Decorate a Wood Pallet Wall
A pallet wall gives a room warmth and texture for very little money. The tricky part comes after: decorating it without making it look cluttered. Here's how to build a simple pallet accent and dress it with things you probably already own.
- Time A weekend
- Skill Moderate
What you'll need
- Heat-treated pallets (look for the HT stamp and skip any marked MB)
- A pry bar and hammer, or a reciprocating saw
- Sandpaper or an orbital sander
- Wood stain and a clear finish
- Construction adhesive and finish nails
- Picture hooks, a small shelf, a faux vine or string lights
How to make it
- Take the pallets apart. Pry the boards off the frame, or cut them free next to the runners with a reciprocating saw. Pull out the old nails.
- Sand. Sand each board to remove splinters. Leave some marks and nail holes, because that's the charm.
- Finish. Stain a few boards a shade darker for a mix of tones, then seal everything with a clear finish.
- Install. Start at the bottom. Glue each board to the wall and tack it with finish nails into the studs, staggering the joints like a floor.
- Decorate. Pick three things, no more: one large frame, one small shelf with a plant, and a trailing vine or lights. Leave about a third of the wall empty so the wood shows.
Make it your own
- Paint the boards white and sand the edges for a whitewashed look.
- Run boards up and down instead of across in a room with low ceilings.
- Add a few hooks at the bottom for keys, bags or dog leashes in an entryway.
Care and storage. Dust the boards with a soft brush now and then. If a board loosens, add a finish nail into a stud rather than more glue.